A dry type transformer terminal link replacement needs approval for the specific transformer connection, current duty, mating terminals and mechanical arrangement. Matching the old link’s outline or hole spacing is insufficient. The link may also establish a particular winding connection or tap configuration, so replacing it with a convenient copper strip can change more than the appearance of the joint. Start with the transformer serial number, connection drawing and approved spare reference. Have the manufacturer or responsible engineer confirm the replacement before a qualified team plans the isolated work.
This guide is for buyers and maintenance planners evaluating spare parts. It does not provide tightening torque, machining instructions or a live-work method. Those details depend on the actual assembly and its approved documentation.
“Terminal link” can describe several different components. A removable winding-connection bridge, a tap link and an external cable connection plate may look similar in a photograph. Their purpose, position and installation restrictions can differ. Identify the part by drawing reference and terminal designation before searching for a replacement.
Use the current connection diagram and compare it with the equipment nameplate. Record the as-found configuration without disturbing it. If the records disagree, resolve the discrepancy before ordering a part. A photograph is helpful evidence, but it does not tell a reviewer the material grade, contact finish, design current or permissible mechanical forces.
The IEEE C57.94 recommended practice addresses the installation, operation and maintenance of dry-type transformers. Its public scope identifies the relevant maintenance subject; it does not approve a substitute link for a particular serial number. Use the applicable complete documents and manufacturer instructions for that decision.
Include the transformer manufacturer, model, serial number, rating plate photograph and connection-drawing revision. Identify which side of the transformer is involved and the exact terminal designations. State whether the part is damaged, missing, corroded, overheated or being requested as a strategic spare. The reason for replacement helps the engineer decide whether the mating terminals also need investigation.
สำหรับ หม้อแปลงชนิดแห้งแบบหล่อเรซิน, ask for the approved part number and its applicability to the ordered unit. Product-family similarity should not be treated as serial-number interchangeability. Different ratings or revisions may use different interfaces even when their external frames look alike.
Request a drawing or spare specification that identifies the supplied part unambiguously. If the manufacturer offers a revised design, ask which associated fasteners, contact components or instructions must change with it. Keep the revision history in the asset records so the next maintenance team does not unknowingly reinstall an obsolete arrangement.
The link has to fit the circuit and the physical assembly. Review current duty, fault-duty requirements, insulation coordination and the intended connection with the responsible engineer. No generic strip-width rule can establish all of these. The approved design may rely on geometry and supporting components that are not obvious from a loose spare.
| รีวิวสินค้า | หลักฐานที่ขอ | Concern if it is missing |
|---|---|---|
| Circuit function | Terminal designations and connection drawing | Wrong winding or tap arrangement |
| ภาระงานไฟฟ้า | Manufacturer’s approved applicability | Part selected only by appearance |
| Contact interface | Mating material, finish and joint arrangement | Unreviewed joint performance |
| Mechanical fit | Hole pattern, thickness and alignment drawing | Forced fit or terminal stress |
| ฮาร์ดแวร์ | Approved fasteners and installation instructions | Mixed or incomplete joint components |
| Insulation space | Verified installed arrangement | Reduced clearance or obstructed insulation |
| Acceptance | Inspection and test plan approved for the repair | No basis for returning the unit to service |
This qualitative review table is a procurement aid. It contains no invented ampacity, torque, clearance or test limit. Those values must come from the equipment documentation and applicable engineering assessment.

A link that does not align naturally with its intended terminals is a reason to stop and investigate. Possible explanations include a wrong spare, a different drawing revision, displaced supports or damage from the original failure. Modifying the link at site may conceal the real mismatch and invalidate the basis on which the part was supplied.
Before accepting any change, ask the manufacturer to review the proposed modification, its effect on the contact interface and the installed insulation arrangement. A machine shop’s ability to produce a shape is not evidence that the resulting component is suitable for the transformer.
The same applies to adding washers, spacers or adapters to make an unsuitable link reach. A change in joint stack can affect contact pressure, alignment and adjacent insulation space. Treat it as a design change requiring specific approval rather than a minor convenience during installation.
If there is discoloration, cracking, looseness or evidence of overheating, do not limit the work order to swapping the visible component. Ask the responsible engineer to define the inspection boundary. The mating terminal, support, connection alignment and service conditions may also need attention. Preserve useful evidence before cleaning or removing damaged material.
Record operating information that can help the investigation: relevant loading history, alarms, previous repair records and any recent connection work. Separate observed facts from assumptions. A dark contact surface alone does not establish the complete cause, and a new link does not prove the cause has been removed.
Refer to the คู่มือการต่อปลายสายเคเบิลของหม้อแปลงชนิดแห้ง cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits. cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits แนวทางของ HSE เกี่ยวกับงานด้านไฟฟ้า cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

The repair package should state what visual checks and electrical tests the responsible engineer requires, and the criteria against which they will be evaluated. Relevant checks may address the intended connection, alignment, joint completeness, insulation condition and performance after the repair. The required test scope depends on why the part was replaced and what else was disturbed.
Acceptance should also confirm that the installed arrangement matches the authorized drawing. Keep the final connection record and part identity with the work order. If a revised part was supplied, identify the revision rather than recording only “link replaced.” A future investigator should be able to establish what was fitted and why.
Any monitored return to service should follow the approved site plan. This guide does not specify an energization sequence, operating threshold or universal follow-up interval. If abnormal heating or other concerns remain, escalate through the site’s engineering process instead of treating the replacement as automatically successful.
A low-priced loose link is not directly comparable with a manufacturer-approved spare kit that includes the correct mating hardware and instructions. Ask each bidder to state the applicability, included items, drawing reference and exclusions. Separate confirmed facts from items still waiting for engineering approval.
A practical purchase description might request an approved terminal-link kit for the identified transformer serial number and terminal arrangement, with part and drawing revisions, supplied hardware, installation instructions and inspection requirements. It should not prescribe guessed dimensions copied from an image.
For new equipment procurement, ask about recommended spares and document availability during the quotation stage. The dry type transformer buying guide explains the broader equipment-selection context. If a replacement also involves temperature-sensor connections, review the separate sensor compatibility article and keep those control interfaces outside the power-link approval scope unless the job actually includes them.
The following US Department of Labor video explains hazardous energy control. It provides general safety context for planning terminal work, including the need to identify energy sources. It is not a demonstration of dry transformer link replacement or a substitute for an approved isolation procedure.
การเรียนรู้เพิ่มเติม: ยืนหยัดเพื่อความปลอดภัยและสุขภาพ – การล็อคเอาท์แท็กเอาท์ — กรมแรงงานของประเทศไทย. เปิดบน YouTube.
Only when the proposed part is specifically approved for the transformer and connection. Copper appearance and matching holes do not establish electrical duty, mechanical suitability or the correct winding arrangement. Request a manufacturer-approved spare or an engineered replacement package before installation.
ไม่ใช่ โปรดยืนยันหน้าที่ของวงจร จุดสัมผัสทางไฟฟ้า อุปกรณ์ฮาร์ดแวร์สำหรับยึดข้อต่อ การจัดแนว และรูปแบบฉนวนที่ติดตั้งอยู่ด้วย ชิ้นส่วนสองชิ้นอาจมีรูปแบบรูยึดเหมือนกัน แต่แตกต่างกันในด้านวัสดุ ความหนา การเคลือบผิว หรือวัตถุประสงค์การใช้งาน ความแตกต่างเหล่านี้จำเป็นต้องได้รับการตรวจสอบเทียบกับการออกแบบอุปกรณ์จริง.
คำแนะนำในการซ่อมที่ได้รับการอนุมัติควรระบุคำตอบสำหรับคำถามดังกล่าวโดยเฉพาะสำหรับข้อต่อแต่ละจุดนั้น อย่าสันนิษฐานว่าสามารถนำชิ้นส่วนกลับมาใช้ซ้ำได้ หรือจำเป็นต้องเปลี่ยนตัวยึดทุกชิ้นโดยไม่มีหลักฐานยืนยัน ควรขอชุดอุปกรณ์ที่ครบถ้วน พร้อมคำแนะนำที่ชัดเจนเกี่ยวกับฮาร์ดแวร์ที่จัดส่งมาและส่วนประกอบที่อนุญาตให้คงไว้ใช้งานได้.
Record the transformer and terminal identity, approved spare and drawing revisions, reason for replacement, installation and acceptance records, and any unresolved observations. Preserve the final connection configuration so later maintenance teams can distinguish an authorized change from an unexplained site modification.