Home Products Power TransformerOil Immersed TransformerS13 10kV and 20kV Oil-Immersed Power Distribution Transformers

S13 10kV and 20kV Oil-Immersed Power Distribution Transformers

The S13 series are fully sealed oil-immersed transformers suitable for power systems with an AC frequency of 50Hz and a rated working voltage of 20kV or less. They are used as distribution transformers in enterprises such as petroleum, metallurgy, chemical engineering, textile, and light industry, as well as in places with large amounts of dust. The transformers feature a high-reliability core made of high-permeability grain-oriented cold-rolled silicon steel sheet, an advanced insulation system, and a fully sealed oil tank design, ensuring maintenance-free operation and a long service life.

Product Overview & Application

The S13 series are fully sealed oil-immersed power distribution transformers designed for AC systems with a rated frequency of 50Hz and a maximum working voltage of 20kV. They are primarily used as distribution transformers in various industrial enterprises, including the petroleum, metallurgy, chemical engineering, textile, and light industry sectors, as well as in locations with high levels of dust. The transformers are designed for high efficiency, low loss, and reliable operation, making them suitable for both indoor and outdoor installations (outdoor installation requires direct sunlight, corrosive gases, or dust to be avoided, while indoor installation requires sufficient heat dissipation space and safety distance).

Key Features & Structural Design

1.Core: The core is made of high-permeability grain-oriented cold-rolled silicon steel sheet. It adopts a new-type structure with fully mitered lap stacked core. The core limb features a multi-step stepped circular cross-section, and the yoke has an equal cross-section to the core limb, ensuring high magnetic efficiency and low no-load loss.

2.Winding: The windings are designed with corrugated oil ducts, adopting a non-varnish impregnation process and fastened with binding tapes. All windings are concentric coils. The high-voltage winding is equipped with taps corresponding to the required tap voltages, which are connected to the tap changer. The tap changer is mounted on the tank cover, and tap voltage adjustment can only be performed after power off.

3.Safety Protection Devices: Transformers with a capacity of 30-2000 kVA are fitted with a pressure relief valve. A gas relay with alarm and trip terminals can be installed according to user requirements.

4.Oil Temperature Measuring Device: All transformers are equipped with a socket for a glass thermometer, which is installed on the top of the oil tank and extends into the oil at a depth of 120±10 mm. Transformers with a capacity of 1000-2000 kVA are fitted with an outdoor-type signal thermometer.

5.Transformer Tank: The transformer tank is constructed with corrugated walls, and its surface is treated with powder coating for firm paint adhesion. The corrugated walls serve the dual functions of heat dissipation and “breathing” fluctuations in volume changes of the transformer oil caused by temperature fluctuations. As a result, the fully sealed transformer eliminates the need for an oil conservator, reducing the overall height of the unit. Vacuum oil filling is applied during transformer encapsulation to completely remove moisture inside the transformer. The transformer oil is isolated from air contact, effectively preventing oxygen and moisture ingress that would degrade insulation performance and accelerate oil aging. Therefore, regular oil sample testing is not required.

6.Working Conditions: Suitable for areas with an altitude not exceeding 1,000 meters, a maximum ambient temperature of +40°C, and a minimum ambient temperature of -25°C or -5°C. The rated frequency of the connected power grid is 50Hz, and the fluctuation range of the power supply voltage shall not exceed ±5% of the rated voltage. The waveform distortion rate shall meet the harmonic management requirements of the power system. The transformers can be installed outdoors or indoors in well-ventilated places. For outdoor installation, direct sunlight, corrosive gases, or dust accumulation shall be avoided; for indoor installation, sufficient heat dissipation space and safety distance shall be ensured. The transformer is allowed to operate continuously for a long time under rated capacity and has a certain short-time overload capacity. If used in special environments such as thunderstorm-prone areas, high humidity, heavy pollution, chemical corrosion, or seismic zones, prior notification shall be given, and an enhanced protection scheme shall be provided.

Product Parameters

Rated
Capacity
(kVA)
High
voltage
(KV)
High voltage
tapping range
(%)
Low
voltage
(kV)
S13-M No load
current
(%)
Short-circuit
impedance%
electrical strip steel
No load loss kW Full load loss kW
Dyn11/Yzn11 Yyno
30 63
10
10.5
±2×2.5
±5
0.4 80 630 710 1.2 4
50 100 910 100 1.04
63 110 1090 1380 0.96
80 130 1310 1380 0.96
100 150 1580 1570 0.88
125 170 1890 1850 0.88
160 200 2310 2130 0.8
200 240 2730 2530 0.8
250 290 3200 2760 0.72
315 340 3830 3470 0.72
400 410 4520 3990 0.64
500 480 5410 4880 0.64
630 570 6200 0.48 4.5
800 700 7500 0.48
1000 830 10300 0.48
1250 970 12000 0.4
1600 1170 14500 0.4
2000 1360 18300 0.32 5
2500 1600 21200 0.32

Application Details

Ready to Source Reliable High & Low Voltage Equipment?

Shenheng Power provides flexible OEM and ODM support for power transmission and distribution equipment. From technical communication and product configuration to production, testing and delivery, we help customers build reliable power equipment solutions for different markets and project needs.

Start Your Custom Project
  • UDEM & ISO9001
  • Project-Based Customization
  • Engineering Support

B2B Manufacturing: OEM Solutions for Distributors

OEM & ODM Custom Power Equipment Solutions

Customized transformers, switchgear, ring main units, prefabricated substations and electrical components for project requirements, technical specifications and market applications.

Strong Engineering Support

Our technical team supports product selection, parameter confirmation, structure discussion and project requirement analysis for power distribution applications.

Flexible Product Configuration

We provide flexible configuration support for transformers, switchgear, ring main units, prefabricated substations and related electrical components.

Stable Manufacturing Capability

With continuous improvement in production equipment, process management and quality control, Shenheng Power supports stable customized manufacturing.

Complete Service System

From early communication to production follow-up and after-sales support, we provide responsive service for customers and project partners.

Manufacturing & Quality Control

Real production environments behind consistent quality and dependable project delivery.

Organized warehouse and material management for electrical equipment
Warehouse & Material Management
Assembly and quality inspection of electrical switchgear
Assembly & Quality Inspection

Application Areas

Power distribution solutions serving industrial, commercial and infrastructure projects.

Related Products

KYN28-12 Indoor Armored Withdrawable AC Metal-Enclosed Switchgear

KYN28-12 Indoor Armored Withdrawable AC Metal-Enclosed Switchgear

View Details
Energy Saving XGN66 Fixed Metal-Enclosed Switchgear Air Insulated Distribution Cabinet for Power Plants

Energy Saving XGN66 Fixed Metal-Enclosed Switchgear Air Insulated Distribution Cabinet for Power Plants

View Details
Reliable CDW6i Universal Air Circuit Breaker Intelligent Trip for Substation Protection

Reliable CDW6i Universal Air Circuit Breaker Intelligent Trip for Substation Protection

View Details
GGD Fixed Type AC Low Voltage Switchgear Power Distribution Cabinet for Industrial Use

GGD Fixed Type AC Low Voltage Switchgear Power Distribution Cabinet for Industrial Use

View Details
Factory Direct Supply High Quality GCS Withdrawable Low Voltage Switchgear

Factory Direct Supply High Quality GCS Withdrawable Low Voltage Switchgear

View Details
Reliable JZZBJ9-10 Indoor Current Transformer 10kV Cast Resin CT for Measurement & Protection

Reliable JZZBJ9-10 Indoor Current Transformer 10kV Cast Resin CT for Measurement & Protection

View Details

Send Inquiry

留言表单