{"id":3932,"date":"2026-11-11T13:00:00","date_gmt":"2026-11-11T05:00:00","guid":{"rendered":"https:\/\/shenhengglobal.com\/?p=3932"},"modified":"2026-11-12T05:25:36","modified_gmt":"2026-11-11T21:25:36","slug":"dry-type-transformer-lifting-eye-replacement-approval","status":"publish","type":"post","link":"https:\/\/shenhengglobal.com\/nl\/blog\/dry-type-transformer-lifting-eye-replacement-approval\/","title":{"rendered":"Vervanging van hijsogen van droge transformatoren: bewijsstukken v\u00f3\u00f3r het hijsen"},"content":{"rendered":"<p>Dry type transformer lifting eye replacement needs approval for the actual transformer and the load path through which it will be lifted. A matching thread or a larger-looking eye is insufficient. Confirm which points are designed to lift the complete unit, what mass and configuration they apply to, and which replacement and installation details the manufacturer approves. If a lifting point is damaged, the supporting structure may also need assessment. Keep the transformer out of the lifting operation until a competent person has resolved the part and lifting-plan requirements.<\/p>\n<p>This guide helps buyers prepare a replacement request. It is not a rigging instruction, a calculation of lifting capacity or authorization to lift from a visible frame hole. The actual operation requires an approved equipment-specific plan and competent lifting personnel.<\/p>\n<h2>Identify the object that will actually be lifted<\/h2>\n<p>A bare active assembly, an enclosed transformer and a transformer mounted on a transport base are different configurations. Their mass, center of gravity and approved handling arrangements may differ. Define the intended lifted configuration before ordering a replacement point.<\/p>\n<p>Record the transformer serial number, drawing revision, supplied accessories and any changes since delivery. Ask the manufacturer which components belong in the lifted mass and whether any must be removed or separately supported. Do not infer the answer from a catalogue weight that may describe another configuration.<\/p>\n<p>For a <a href=\"https:\/\/shenhengglobal.com\/product\/6kv-10kv-cast-resin-three-phase-dry-type-transformer\/\">cast-resin dry type transformer<\/a>, the product photograph identifies the relevant equipment family. It does not establish which visible holes or brackets are rated lifting points. The manufacturer&#8217;s handling drawing and actual unit information must provide that evidence.<\/p>\n<h2>Distinguish a rated lifting point from a convenient attachment<\/h2>\n<p>Frames can contain holes for manufacturing, assembly, transport or accessory mounting. An opening that accepts a hook is not automatically intended to carry a lift. Likewise, a bracket suitable for one handling stage may not be approved for every assembled condition.<\/p>\n<p>Ask for the approved lifting-point locations and the relevant instructions. If the original eye is missing, do not substitute a general-purpose item simply because its thread fits. The mating material, engagement, load direction and supporting structure are part of the review.<\/p>\n<p><a href=\"https:\/\/standards.ieee.org\/ieee\/C57.94\/10864\/\" rel=\"noopener nofollow\" target=\"_blank\">IEEE C57.94<\/a> identifies installation and maintenance of dry-type transformers as its subject. Its public scope does not assign a capacity to a specific eye or frame. Use the complete applicable guidance alongside the manufacturer&#8217;s unit-specific handling instructions.<\/p>\n<h2>Preserve evidence of the original damage<\/h2>\n<p>Record the observed condition before repair: missing hardware, deformation, damaged thread, corrosion, impact marks or cracking around the attachment. Do not grind, weld or straighten the area to improve its appearance before the responsible engineer has assessed it.<\/p>\n<p>Identify any previous handling incident and retain transport or maintenance records. A replacement eye cannot restore a damaged supporting structure by itself. The engineer may require further examination or a different handling arrangement, depending on what is found.<\/p>\n<div class=\"b2b-table-scroll\" style=\"width:100%;overflow-x:auto;\">\n<table style=\"width:100%;min-width:620px;border-collapse:collapse;\">\n<thead>\n<tr>\n<th style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Approval boundary<\/th>\n<th style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Evidence to obtain<\/th>\n<th style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Why a simple visual match is insufficient<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Lifted configuration<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Actual unit, accessories and approved mass<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Catalogue data may describe a different condition<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Point identity<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Manufacturer&#8217;s handling drawing<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Not every frame hole is a lifting point<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Replacement item<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Approved part and applicability<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Matching threads do not prove suitability<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Mating structure<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Condition assessment and repair instructions<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">The failure may extend beyond the eye<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Loading arrangement<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Approved lift plan and permitted directions<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Capacity depends on the actual arrangement<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Installation<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Manufacturer&#8217;s fitting instructions<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Unspecified engagement or hardware leaves uncertainty<\/td>\n<\/tr>\n<tr>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Release<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">Defined inspection and authorization<\/td>\n<td style=\"border:1px solid #d9e1e8;padding:10px;text-align:left;vertical-align:top;\">A new part alone does not approve the lift<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The table is an evidence checklist. It does not specify sling angles, thread engagement, tightening torque or lifting capacity.<\/p>\n<p><figure><img decoding=\"async\" src=\"https:\/\/shenhengglobal.com\/wp-content\/uploads\/2026\/11\/dry-type-transformer-lifting-eye-replacement-approval-body-1.webp\" alt=\"Dry transformer with original three red coils, blue frame, colored leads and three base fans in a clean empty industrial building\" width=\"1536\" height=\"1024\" loading=\"lazy\" style=\"max-width:100%;height:auto\"><figcaption>Product reference illustration based on the Shenheng product image; not an actual maintenance, test or customer-site record.<\/figcaption><\/figure>\n<\/p>\n<h2>Request the complete replacement detail<\/h2>\n<p>The spare request should identify the part, its interface and the transformer configuration it is approved to support. Ask whether associated bolts, washers, retainers or structural components must be replaced with it. If a revised part is supplied, require its applicability and any companion changes.<\/p>\n<p>Avoid mixing an independently rated lifting accessory with an unreviewed transformer attachment. The accessory&#8217;s own rating does not prove that the transformer frame or mating thread can support the proposed arrangement. Both the component and its installed load path require an appropriate basis.<\/p>\n<p>If the original design is obsolete, request a documented engineered alternative. The proposal should state the affected structure and any inspection, repair or handling changes. Do not describe a modified attachment as like-for-like unless the responsible engineer has established that equivalence.<\/p>\n<h2>Keep the part decision connected to the lift plan<\/h2>\n<p>A correct replacement is one input to the operation. The lift plan must also account for the actual configuration, route, clearances, lifting equipment and competent supervision. Do not let spare procurement become an informal authorization for a crane crew to proceed.<\/p>\n<p>The <a href=\"https:\/\/www.hse.gov.uk\/work-equipment-machinery\/loler.htm\" rel=\"noopener nofollow\" target=\"_blank\">HSE information on lifting operations and equipment<\/a> points to planning, safe lifting and examination topics. It describes a UK framework; the responsible team must apply the legal and site requirements for the actual location. This article does not determine those requirements or supply a compliant plan.<\/p>\n<p>Tell the lifting planner about any repaired point and provide the manufacturer&#8217;s approval and inspection record. If the approved handling arrangement cannot be achieved at the site, resolve that constraint before mobilizing the operation. Changing the attachment arrangement at the last moment can invalidate assumptions used in both procurement and planning.<\/p>\n<h2>Prepare the transformer for relocation through an authorized process<\/h2>\n<p>An installed transformer may have electrical connections, monitoring circuits, grounding connections and surrounding services. Their safe treatment is a separate part of the relocation plan. Do not assume that a transformer is ready to move because its main supply has been switched off.<\/p>\n<p>Define who controls isolation, disconnection and release to the lifting team. Keep the boundary clear between electrical work and material handling. The <a href=\"https:\/\/shenhengglobal.com\/blog\/dry-type-transformer-cable-termination\/\">dry transformer cable termination guide<\/a> provides surrounding connection context, while the actual disconnection and reconnection method remains equipment-specific.<\/p>\n<p>Plan protection for exposed insulation and terminals using approved methods. A sound lifting point does not protect coils from contact with unsuitable handling equipment. The <a href=\"https:\/\/shenhengglobal.com\/blog\/dry-type-transformer-installation-clearances\/\">installation clearance guide<\/a> helps review the destination layout, but it does not replace the physical lift and placement plan.<\/p>\n<p><figure><img decoding=\"async\" src=\"https:\/\/shenhengglobal.com\/wp-content\/uploads\/2026\/11\/dry-type-transformer-lifting-eye-replacement-approval-body-2.webp\" alt=\"Dry transformer with original three red coils, blue frame, colored leads and three base fans on a dark background\" width=\"1536\" height=\"1024\" loading=\"lazy\" style=\"max-width:100%;height:auto\"><figcaption>Product reference illustration based on the Shenheng product image; not an actual maintenance, test or customer-site record.<\/figcaption><\/figure>\n<\/p>\n<h2>Establish what releases the repaired point for use<\/h2>\n<p>The manufacturer or responsible engineer should define the required inspection and any further examination after replacement. The record should show the actual part and revision, supporting-structure condition, installation and acceptance basis. Do not invent a proof-load test or apply a load to \u201csee if it holds.\u201d<\/p>\n<p>If a test is required, it needs an approved method, controlled conditions and competent responsibility. The operation should not be used as the first unplanned test of an uncertain attachment. Keep any limitations visible in the release record.<\/p>\n<p>A complete approval should relate to the intended lifted configuration and arrangement. If the configuration changes afterward, have the plan reviewed. An authorization for handling a bare unit should not silently become authorization to lift an enclosed or modified assembly.<\/p>\n<h2>Compare quotations on the engineering scope<\/h2>\n<p>Provide the same unit identity, damage evidence and intended configuration to each qualified supplier. Ask whether the price includes applicability review, spare hardware, structural assessment and installation guidance, or only the loose component. Identify who provides the final lift-plan approval.<\/p>\n<p>A short lead time for an unreviewed eye may not shorten the project. Engineering clarification and any supporting repair can remain the controlling tasks. Make those tasks visible in the schedule instead of treating the arrival of a metal part as completion.<\/p>\n<p>For broader purchasing context, use the <a href=\"https:\/\/shenhengglobal.com\/blog\/dry-type-transformer-epc-buying-guide\/\">dry transformer buying guide<\/a>. If the unit is being moved into storage rather than immediately installed, the <a href=\"https:\/\/shenhengglobal.com\/blog\/dry-type-transformer-storage-inspection\/\">storage inspection guide<\/a> addresses a different part of the handover. Maintain separate records for handling approval, storage condition and later electrical acceptance.<\/p>\n<h2>Electrical safety background before removal<\/h2>\n<p>The following US Department of Labor video explains hazardous energy control. It supports the electrical-release part of relocation planning; it does not demonstrate rigging, rate a lifting point or provide the mechanical lifting method. The actual lift needs its own competent plan and supervision.<\/p>\n<div style=\"position:relative;aspect-ratio:16\/9;width:100%\"><iframe allowfullscreen=\"\" loading=\"lazy\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/aTOOegjstG0\" style=\"position:absolute;width:100%;height:100%;border:0\" title=\"Stand Up For Safety and Health - Lockout tagout\"><\/iframe><\/div>\n<p>Further learning: Stand Up For Safety and Health &#8211; Lockout tagout \u2014 USDepartmentofLabor. <a href=\"https:\/\/www.youtube.com\/watch?v=aTOOegjstG0\" rel=\"noopener nofollow\" target=\"_blank\">Open on YouTube<\/a>.<\/p>\n<h2>Frequently asked questions<\/h2>\n<h3>Can I use a larger lifting eye with the same thread?<\/h3>\n<p>Not without approval for the actual interface and load path. The eye&#8217;s apparent size or independent rating does not establish the capacity of the mating structure. Obtain the manufacturer&#8217;s replacement detail and the competent lifting planner&#8217;s acceptance of the intended arrangement.<\/p>\n<h3>Are all holes in the upper frame suitable for lifting?<\/h3>\n<p>No such assumption should be made. Use the manufacturer&#8217;s handling drawing to identify approved points and the configuration they apply to. Manufacturing and mounting holes may look convenient while having no approved lifting function.<\/p>\n<h3>Does replacing a damaged eye make the transformer ready to lift?<\/h3>\n<p>No. The supporting structure, installed part and intended lifting arrangement still require acceptance. Electrical and service connections must also be safely released through the authorized process. A replacement component is only one part of preparing the complete operation.<\/p>\n<h3>What belongs in the final handling record?<\/h3>\n<p>Keep the transformer configuration, approved point and spare references, supporting-structure assessment, installation and examination results, and release authority. Link those records to the lift plan so the crew and future maintenance teams understand the scope and limitations of the approval.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can I use a larger lifting eye with the same thread?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Not without approval for the actual interface and load path. The eye's apparent size or independent rating does not establish the capacity of the mating structure. Obtain the manufacturer's replacement detail and the competent lifting planner's acceptance of the intended arrangement.\"}}, {\"@type\": \"Question\", \"name\": \"Are all holes in the upper frame suitable for lifting?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No such assumption should be made. Use the manufacturer's handling drawing to identify approved points and the configuration they apply to. Manufacturing and mounting holes may look convenient while having no approved lifting function.\"}}, {\"@type\": \"Question\", \"name\": \"Does replacing a damaged eye make the transformer ready to lift?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The supporting structure, installed part and intended lifting arrangement still require acceptance. Electrical and service connections must also be safely released through the authorized process. A replacement component is only one part of preparing the complete operation.\"}}, {\"@type\": \"Question\", \"name\": \"What belongs in the final handling record?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Keep the transformer configuration, approved point and spare references, supporting-structure assessment, installation and examination results, and release authority. Link those records to the lift plan so the crew and future maintenance teams understand the scope and limitations of the approval.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Controleer bij de vervanging van het hijsoog van een droge transformator de daadwerkelijke hijsconfiguratie, goedgekeurde hijspunten, draagconstructie, identificatie van het reserveonderdeel en de hijsplanning.<\/p>","protected":false},"author":4,"featured_media":3928,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-3932","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"blocksy_meta":{"styles_descriptor":{"styles":{"desktop":"","tablet":"","mobile":""},"google_fonts":[],"version":7}},"acf":[],"_links":{"self":[{"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/posts\/3932","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/comments?post=3932"}],"version-history":[{"count":1,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/posts\/3932\/revisions"}],"predecessor-version":[{"id":3933,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/posts\/3932\/revisions\/3933"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/media\/3928"}],"wp:attachment":[{"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/media?parent=3932"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/categories?post=3932"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/shenhengglobal.com\/nl\/wp-json\/wp\/v2\/tags?post=3932"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}